MugEasy C30-M Borescope inspection camera is a high-precision with 4.3-inch HD color display. It adopts an ergonomic design, is easy to operate, real-time viewing of high-definition real images.
This snake camera is equipped with 8 LED auxiliary lighting small diameter HD camera, you can adjust the brightness at will. The camera adopts a high-sensitivity chip, which can be used normally even in a dark working environment.
Bore scope camera probe is IP67 waterproof, the endoscope camera with light can easily face the harsh wet and underwater environment.
Friendly Reminder
1. The endoscope can adjust the brightness, please read the instruction manual carefully before use.
2. Before each use, ensure that the endoscope lens is protected to avoid scratching and blurring the lens.
3. Do not wipe the lens with a wet cloth. It is recommended to wipe the lens with cotton wool or lens cleaning paper.
4. When checking the vehicle, make sure that the engine and other parts of the car are at room temperature and use the endoscope.
5. When using the endoscope, please control the focal length of the object to adjust the sharpness (the image will become blurred if it is too close to the object).
6. Our products only support real-time viewing, do not support taking photos or recording videos.
borescope camera with light
MugEasy Borescope Camera
- 1. Color/Black and white: Switch between black and white
- 2. To rotate: The picture is rotated 180 degrees
- 3. LED adjustment “+”: LED light gradually increased from 0-60-80-100%
- 4. LED adjustment “-”: LED light gradually decreases from 100-80-60-0%
- 5. Compared: Positive-boost-weak adjustment
- 6. Zoom out: Image shrinkage 2.0-1.5-1.0x diminishingly
- 7. Zoom in: Image magnification 1.0-1.5-2.0x incrementally
- 8. Power button: Press and hold f
- 9. Charging interface: Connect to a computer or mobile phone adapter through a Type-C data cable for charging, and be careful not to use an adapter above 12V
- 10. Reset: If the machine freezes or freezes, you can reset it back to normal
